SmartCell® Load Cells
Harbour Marine Engineering manufacture Load Pins (Load Cells) to support Mooring Line Tension Monitoring in Quick Release Hooks, Chain Stoppers and Hawser Hooks.
The load cell is generally installed into the rear horizontal swivel within the quick release hook and is designed specifically to suit the hook's swivel joint dimensions.
In addition to supply with new equipment, load pins are be designed for retrofit to Harbour Marine hooks, or for installation in most other brands of mooring hooks as part of an upgrade.
Calibrated Safe Working Load (Typical QRH’s) |
Zero to 30, 60, 75, 100, 125 or 150 Tonnes |
Calibrated Safe Working Load (Typical Hawser Hooks & Chain Stoppers for FPSO’s) |
Zero to 200, 250, 300, 350 or 450 Tonnes |
Proof Load |
Minimum 1.25 times Safe Working Load |
Certification for Hazardous Location |
Explosion proof EX d IIC T6 for Class 1 Zone 1 and Zone 2. ATEX certified. |
Accuracy |
±2% of Full Load BSL |
Material |
High Tensile Stainless Steel |
Water/Dust Sealing To ingress protection |
IP66 or IP68 |
Load Cell Output |
mV (SmartHook® III Version with Digital memory), or 4-20mA 3 wire Current Sink |
Design Pressure Rating |
50M water head |
